Dish Hopper 3 Problems: Reasons and Solution To Fix If Not Working

Dish hopper 3 problems

Last updated on August 17th, 2023 at 08:40 am

Having Dish Hopper 3 Problems? The dish is considered one of the most stable and secure subscriptions for your TV streaming experience. You can count on it to deliver the fastest possible communication on all forums you may have. It can be used to store more than 2000 hours of movies and shows and has been ranked as one of the most powerful DVR systems there is. 

Unfortunately, this system is also flawed. There are some issues that you will encounter along the way. These include failure to turn on, low streaming quality, and the pictures on Joey, wireless, and wired going blank. It is important to know how to troubleshoot these issues so that you know what to do when they happen. 

Wanna take your TV further? You would love our Dish Joey article, but for now this article is a summary of these issues as well as their solution so you are not left stranded in the event any of them occur. Read onto learn Why is my dish hopper not working. 

Why is my dish hopper not working

Are you scratching your head wondering why your dish hopper just won’t work? Don’t worry, we’ve got you covered. First, check to make sure all the cables are properly connected. If that doesn’t work, try restarting the device. If those simple solutions don’t do the trick read our expert advice below.

Dish Hopper 3 Problems (Reasons and Solutions)

The Hopper is basically a DVR set-top box that is provided by the US direct broadcast satellite television provider Dish Network. However, just like any other technological device, the Hopper 3 is susceptible to some glitches here and there. Thankfully, they can be easily resolved. 

Low Streaming Quality

Another issue with the Hopper 3 is lower video quality. It is often common when having an internal error or slow internet. 


If you notice that the streaming quality is decreasing, the internet connection and speed may be issue. Ideally, high-speed internet will give you better streaming quality.

However, if the internet is working fine on other devices and the speed is also okay, then check for any pending firmware update of the Dish Hopper 3 that you may have missed. If there is any update, install it and then check to see if the issue has been resolved. 

The Picture on the Joeys, Wireless, and Wired Goes Blank.

You can also encounter a scenario where the pictures on the wireless, wired, and joeys go blank. The only culprit for this issue is the cable that supplies power to the Hopper. 


To fix this issue, you will have to replace the cable with a new one.  

Not Turning On

With this device, you could easily come across a situation where it does not turn on. This often happens as a result of a faulty power cable or bugs in the system and hence it is not as troublesome.  


The first thing is to check the entire length of the power cable for any damage. Also, check for any loose connections. You can attempt to plug in another device to the same power outlet to see if the outlet is in working order.

If the cables are neither loose nor damaged, try power cycling the device. This is done by unplugging all cables and connectors from the device and then waiting for 5 minutes so it can drain all the power. Then, plug in all the cables and connectors and check if the issue is fixed. 

Quickfire Dish Hopper troubleshooting problems and solutions

  1. No signal or error message on TV: Check that all cables are properly connected and tightened. If that doesn’t work, try resetting the Hopper by unplugging it for 10 seconds and then plugging it back in.
  2. Remote control not working: Replace the batteries in the remote control. If that doesn’t work, try resetting the remote by pressing and holding the SAT button until the four lights on the top of the remote blink twice.
  3. Recording issues: Check that there is enough storage space on the Hopper. If not, delete some recordings to free up space. If the issue persists, try resetting the Hopper.
  4. Slow performance: Try resetting the Hopper by unplugging it for 10 seconds and then plugging it back in. If the issue persists, check for any software updates and install them if available.
  5. Audio or video issues: Check that all cables are properly connected and tightened. If that doesn’t work, try resetting the Hopper. If the issue persists, contact Dish Network customer support for further assistance.

There are many reasons that the Dish Hopper 3 may be having issues, if this article didn’t help, feel free to reach out to me, and ill see if I can help further.

The Dish DVR Not Working Debacle: How I Fixed My TV Woes

My entire TV viewing experience come to a screeching halt? If so, you know how frustrating it can be to have your DVR malfunction. Recently, my Dish DVR stopped recording and playing back shows, and it took some troubleshooting to fix the issue. Luckily, I’m here to share some tips so that you can avoid the same headache I had.

Step 1

My first step was to check all my connections. I made sure each cable was properly plugged in and had not become dislodged. Once I confirmed that all connections were secure, I rebooted my DVR and TV. Sometimes, all it takes is a good ole reboot to get things working again. In my case, however, this did not do the trick.

Step 2

After the reboot failed, I went into the settings on my Dish DVR to try to diagnose the issue. Upon opening the “Diagnostics” tab, I was informed that my receiver was not connected to the network. I had unplugged my DVR to rearrange my entertainment center, so this made sense. I reconnected the Ethernet cable, but still had no success.

Step 3

That’s when I decided to call Dish’s customer service line. The representative walked me through a checklist of troubleshooting steps that I had already tried, but then he suggested I reset my receiver. This is done by holding down the power button on the front of the DVR until it shuts off. Once I turned it back on, my DVR was able to connect to the network again.

Step 4

Though resetting my receiver ultimately fixed the issue, other potential solutions could help out with a malfunctioning DVR. For instance, if your DVR is experiencing low signal quality, it could be related to an outdated cable or an obstruction in the line of sight between your dish and the satellite. Checking your signal strength will help you diagnose this problem. Another potential issue could be a full hard drive. Ensure you have enough space on your DVR to record new shows!

Step 5

To sum it all up, my Dish DVR debacle was fixed by resetting my receiver, but there are a variety of other potential issues that could cause a malfunctioning DVR. If you’re having difficulty with your Dish DVR, I recommend checking all connections, rebooting your system, and contacting customer service for additional support.

While dealing with a malfunctioning DVR can be frustrating, staying calm and methodical in your troubleshooting is important. By following the steps I outlined above, you can get back to enjoying your favorite TV shows in no time. Always work through a checklist of potential solutions and never hesitate to contact customer service for professional advice. Happy viewing!


To reset the Hopper, access the room with the main Hopper receiver. While there, hold the reset button on the front of your Hopper for about 5 seconds. The reset process takes about 5 minutes to complete. 

The issues outlined above are the most common problems as far as the Dish Hopper 3 is concerned. However, if you have come across other issues apart from these and are unable to find a solution, you are advised to contact Hopper support so they can aid in their expertise. 

Dish Hopper 3 DVR/receiver is recommended as the best for most readers. 

Final Thoughts

So if you are having Dish Hopper 3 problems or if its not working, just remember that the Dish Hopper 3 is one of the greatest in its time. Their subscription is not only top-notch but also you won’t have to face any issues with them.

There are several factors to be considered, including choosing the best possible hardware so that you can enhance your overall experience and enjoy a better edge of networking. With the solutions above in your fingertips, you are good to go.

You Can Also Read: